- Best LEGO Star Wars Clone Wars Sets - March 7, 2023
- Biggest LEGO Sets Guide - March 7, 2023
- Best LEGO Castle Sets of All Time - February 28, 2023
Some of the most popular sets LEGO published in Star Wars, Marvel, and DC themes since 2000 were released within the Ultimate Collection Series. In the LEGO AT-AT review, I’ll walk you through the key features, and construction process of the second-largest USC LEGO Star Wars set to date.
After only a few months on the market, the AT-AT 75313 is already accepted as one of the best sets LEGO ever released within this theme. This is also by far the biggest set inspired by AT-AT since none of the previous models had more than 2,000 pieces.
Bottom Line Up Front
Only a few LEGO sets published within any theme can compare to the AT-AT 75313 model in terms of size and the complexity of the build. However, the high price tag and tiring construction process make this set likely suitable for adult LEGO builders with considerable set-building experience.
See also: The best LEGO Star Wars helmets
The Ins and Outs of the LEGO AT-AT 75313 set
Basic info
- Release date: November 26, 2021
- Piece count: 6,785
- Age group: 18+
- Price range: $$$$
Star Wars theme currently features two active AT-AT sets, but the AT-AT 75288 model is considerably smaller than the USC AT-AT 75313 building kit.
Even though the AT-AT toys featured in these two sets resemble each other, the AT-AT Walker from the 75288 kit is far less detailed than the AT-AT replica from the 75313 set.
Moreover, LEGO has released multiple sets that featured AT-AT Walker toys since 2003, including the following models:
The 2021 build-to-display AT-AT set retains the gray color pattern we’ve seen on earlier models, but it also brings a variety of design improvements. Like most LEGO sets with more than 5,000 pieces, this model should remain in production for more than three years, so its estimated exit date is November 2024.
See also: The biggest LEGO sets guide
Packaging and Building Instructions
Basic info
- Number of bags: 50
- Building instructions booklets: 4
The design of the set’s box is characteristic for Star Wars USC sets, and it is similar to the packaging of Republic Gunship 75309 or A-Wing Starfighter 75275 models.
The front cover features a large model of the AT-AT Walker on a black background next to the set’s title, while the LEGO and Star Wars logos are located in the bottom corners. Images of the model’s interior, features, feet, and the set’s Minifigures are included on different box sides.
You’ll find four smaller numbered boxes inside the set’s outer packaging that create the image of AT-ATs walking on Hoth when stacked. Each box contains separate building instructions booklets with 60 to 268 pages packaged into a cardboard envelope.
Top tip: Going through the building instruction booklets will help you understand the construction process better.
The first few pages of each booklet are dedicated to AT-AT trivia, and the innovations the set’s designers used to improve the model’s stability and functionality.
An Overview of the Set’s Pieces and Minifigures
Most of the set’s 6,785 pieces are already included in other LEGO sets, so the AT-AT 75313 model doesn’t bring a lot of new molds. Several parts featured in this set appear for the first time in new colors, including the Technic turntable, 11-stud flip-flop beam, and 4×4 tile with rounded corners.
Let’s take a look at the new pieces this set introduces:
- Technic frictionless pin with stop
- Quarter circle gear elements
The sticker sheet has only a few stickers, including the info sticker for the display plaque. The set comes with Luke Skywalker, General Veers, two armored AT-AT drivers, Snowtrooper Commander, and four Stormtrooper Minifigures.
- The design of the General Veers Minifigure is similar to its previous version featured in the 2020 AT-AT 75288 set.
- Luke Skywalker Minifigure is the same as the one included in the Luke Skywalker’s X-Wing Fighter 75301 set, with minor discrepancies in leg and torso decorations.
- Removable helmets, different head elements, and printed uniform decorations are some of the key characteristics of AT-AT driver Minifigures. However, none of these elements are new.
- Snowtrooper Commander and Snowtrooper Minifigures don’t have any new design elements.
See also: The best LEGO stormtrooper sets
Construction Process
The build is divided into four stages, as indicated by the set’s four boxes. The number of steps you need to complete to proceed from one stage of the assembly process varies from 200 to nearly 1,300.
In addition, the set features several speeder bikes and E-Web blasters you’ll have to assemble after you complete the AT-AT model.
Stage I
The construction starts with building the chassis and the upper portion of AT-AT’s legs. Most of the frame is composed of Technic beams and vertical arms, accompanied by exterior details.
The model’s shoulders are composed of Technic turntables connected to worm gears capable of supporting the weight of the model’s body.
Top tip:Â Another builder can construct AT-AT’s body while you’re working on its chassis and upper legs.Â
Stage II
The second box has 13 bags of pieces used to construct the lower portion of the model’s legs. This part of the build is repetitive because each leg has identical pieces. The feet are equipped with rubber tire elements that prevent the model from sliding off a surface.
Stage III
The majority of AT-AT’s body, its rich interior that includes six rooms, and the flexible neck are built during the third stage of the construction process. The body’s angled frame is composed of Technic beams and hinge bricks.
As you move further, you’ll add a new layer that contains forty seats for Imperial soldiers, a fuel cell section, and the speed bike bay. The neck subassembly features several motorcycle hubs mounted on a flexible red tube and 1×16 Technic links that support the head’s weight.
The bottom of the body has four Technic parts that enable you to attach it to the chassis, which has Technic axles with stops that keep the two elements together.
Top tip: Make sure that the body is positioned correctly before attaching it to the chassis because separating these elements can be difficult.Â
Stage IV
The final phase of the build is also the longest one, as you’ll have to go through 1,280 steps to complete it. You’ll construct AT-AT’s head that doubles as a cockpit with room for three Minifigures during this stage.
The cockpit’s armor features adjustable laser cannons, and you can lift its roof to access the interior. The rest of the build involves constructing the side panels for the body and the cargo door. Speeder bikes, turrets, and Minifigures are assembled at the end of the assembly process.
A Look at the Completed Model
The imposing presence of the display model becomes apparent during the later stages of the assembly process. The finished model is 24.5 inches tall and 27 inches long, almost twice the size of the 2020 version of this toy.
Its shoulders and knees aren’t adjustable by hand because they’re held in place by worm gears, so you’ll have to use the tool included in the set to change their position. The building instruction booklet offers information on how to adjust the AT-AT’s legs.
The upper portion of the cockpit opens, so accessing its interior won’t be difficult. You can place up to three Minifigures in the cockpit and use the knob behind the neck section to move it left or right.
The body’s interior can either be accessed by opening the cargo door or removing its side armor. The troop bay with seats for forty Minifigures is located on the upper level, while the speeder bike storage room is on the level below.
See also: The best LEGO Clone Wars sets.
Set’s Playability
Lifting and moving this AT-AT model without having pieces falling off is almost impossible. The sections around its shoulders and lower portions of the body are delicate, and even a minor movement can cause damage that takes a while to repair.
The rubber wheels in the AT-AT’s feet keep the model stable and make it possible to use it as a playground if you manage to keep it steady. The set’s nine Minifigures, several speeder bikes, and blaster accessories allow you to develop a broad spectrum of play scenarios.
Top tip: You can purchase the Snowtrooper Battle Pack 75320 if you want to add more snowtrooper Minifigures to this display model.Â
AT-AT’s rich interior offers plenty of room for interactions between the Snowtrooper Commander and his soldiers. The General Veers Minifigure fits into the spacious cockpit where he can issue commands to AT-AT drivers.
The set comes with several speeder bikes and turrets Snowtroopers can use against Luke Skywalker. Despite providing various play options, the AT-AT 75313 is primarily a build-to-display set that isn’t designed for active play.
Price and Value
The Millennium Falcon 75192 and AT-AT 75313 are the most expensive active LEGO sets. The market value of both of these models is around $800, although their price on secondary markets often varies between $850 and $900.
The AT-AT 75313 model has 760 pieces less than the largest LEGO Star Wars set, but their price is the same despite this. However, the value of the Millennium Falcon 75192 set will increase soon because its production should stop in the second half of 2022.
On the other hand, the latest AT-AT model should remain on the market until 2024 and possibly longer, which means that its value will remain the same for at least a few more years. Its value is expected to rise to over $1,000 after LEGO discontinues it. None of the set’s Minifigures are new, and their price should remain the same.
See also: Guide to the most expensive LEGO sets
Pros and cons of the AT-AT 75313 Set
Pros
- AT-AT model is stable on all surfaces
- Adjusting leg or head positions is easy
- The construction process isn’t overly repetitive
- Rich and easily accessible interior
- A wide selection of accessories
Cons
- Some parts come off easily
- Prohibitively expensive
- None of the Minifigures are exclusive to this set
The Best Alternatives to the LEGO AT-AT 75313 Set
A lengthy construction process and a high price tag are the most common reasons LEGO fans search for alternatives to this set.
You won’t have a lot of options if you’d like to get a Star Wars model in a similar piece count range because only a handful of sets in this theme have more than 5,000 pieces. I listed several potential substitutes for the AT-AT sets, so here’s what they have to offer.
AT-AT 75288
- Piece count: 1,267
- Age group: 10+
- Price range: $$$
Although it is much smaller than the 2021 model, the AT-AT 75288 set has similar features. You can adjust the position of the toy’s head and legs, store a speeder bike in the toy’s body or add up to three Minifigures to its cockpit.
This set comes with six Minifigures, including General Veers, Luke Skywalker, and two AT-AT drivers. The toy also has an opening hatch at the bottom of the body that wasn’t included in the most recent version.
Millennium Falcon 75192
- Piece count: 7,541
- Age group: 16+
- Price range: $$$$
After nearly four years on the market, the Millennium Falcon 75192 is still one of the most popular LEGO Star Wars sets. This USC model has a variety of authentic details like quad laser cannons, a boarding ramp, and landing equipment.
Removing the ship’s hull plates gives you access to the gunning station and main hold, while lifting the cockpit’s canopy allows you to give Han Solo, Princess Leia, Chewbacca, and C-3PO the command of the ship. The set also features alternative Rey, Fin, and older Han Solo crew for displays based on Episode VII or VIII films.
Imperial Star Destroyer 75252
- Piece count: 4,784
- Age group: 16+
- Price range: $$$$
The Imperial Star Destroyer 75252 is one of the largest Star Wars sets ever. The replica of the Star Destroyer ship is based on the ship’s appearance in the opening scene of the Episode IV movie, and it measures 43 inches long, 23 inches wide, and 16 inches tall.
The bridge tower with twin deflector shields, engine exhausts, and a radar dish are some of the model’s authentic details. In addition, the set features a replica of Tantive IV that attaches to the Imperial Star Destroyer, just like in the movie.
Notable Mentions
Frequently Asked Questions About LEGO AT-AT 75313 Set
Question: Who is the designer of the AT-AT 75313 Set?
Answer: Henrik Andersen developed the AT-AT model featured in this set.
Question: How Long Does it take to Build the AT-AT 75313 Set?
Answer: Building this set takes around twenty hours or more, depending on your skills.
Question: Does the AT-AT 75313 Contain Spare Pieces?
Answer: Yes, this set comes with a few extra pieces, but the chances are that you’ll have to buy replacement parts if an original piece is damaged.
Question: How Much does the AT-AT 75313 Set Weigh?
Answer: The set weighs over 26lbs, with the boxes and instruction manuals, while the display model alone weighs around 20lbs.
Final Thoughts
A beautiful interior, posable legs, adjustable solid neck, and a spacious cockpit are some of the AT-AT 75313 set’s highlights that will attract your attention as soon as you lay your eyes on the fully assembled model.
The latest LEGO AT-AT is an engineering marvel that takes you on an immersive construction experience and challenges your set-building abilities. Nonetheless, the AT-AT model is fragile, and even a slight movement can undo hours of work.
The set’s building instructions are confusing and hard to follow at times which further complicates an already complex build. The AT-AT 75313 model is only a good fit for devoted Star Wars fans and seasoned LEGO builders who don’t mind its steep price tag.
Our guide to the best LEGO sets under $100 can help you find a more affordable model if the latest LEGO AT-AT’s price exceeds your budget.
Recommended Reads: